Presence Detection System is an advanced presence detection by passive infrared (PIR) technology. It regulates photocell adjusts luminaire output to maintain constant light levels.
Specifications:
• Active presence detection by ultrasonic radar technology
• Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes)
• Detection pattern and range in metres under normal operating conditions5
• Remote control for temporary user-override on/off and light level adjustment
• Advanced presence detection by passive infrared (PIR) technology
• Photocell holds light off in bright ambient conditions when area becomes occupied (for MS 1200 PF)
• Regulating photocell adjusts luminaire output to maintain constant light levels (for MS 1200 DF)
• Detection pattern and range in metres under normal operating conditions
• Two way programming enables easy re-commissioning when building use changes
• Fixed off delay of 10 minutes following the last observed movement after which the lights switch off
• Detection pattern and range in meters under normal operating conditions
• Regulating photocell adjusts luminaire output to maintain constant light levels
• Active photocell switches lights on and off according to ambient conditions
• Passive photocell holds light off in bright ambient conditions when area becomes occupied
• Two way programming enables easy re-comissioning when building use changes
• Remote control for temporary user-override on / off and light level adjustment
• Passing cloud timer prevents nuisance switching when light levels fluctuate rapidly. Can be set from 5 - 60 min
Home|About Us|Products|Enquiry|Inpiration|Contact Us © Jain Vidyut 2011-2012. All Rights Reserved. Cable Jointing Kits | Electrical Cables | Electrical Wires | MCCB | Building Circuit Protection