Managed Lighting Systems

Managed Lighting System has been designed to provide optimum lighting conditions and maximum flexibility for office lighting projects of any size.

List  Details  [1]   Mls Bus Power Supply Specifications: • Single unit powers up to 200 MLS detectors • Inbuilt test facility to check Bus integrity • Establishes building wide common zones without additional hardware • 32 MLS Bus Power supplies can be connected together • Mains rated, unscreened twisted pair 1.5 mm Bus cable to be used • Allowable Bus length not to exceed 1000 m Mls Digital Detector For Use With Analogue Regulating Ballast Specifications: • Advanced presence detection by passive infrared (PIR) technology • Can be programmed to automatically recall Entry & Exit scenes • Can be programmed to create upto 6 lighting scenes • Two way programming enables easy re-commissioning when building use changes • Remote control for temporary user-override on/off and light level adjustment • Detection pattern and range in metres under normal operating conditions • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes) • MLS Detectors may be programmed to be members of up to four group zones • Regulating photocell adjusts luminaire output to maintain constant light levels • Communicates via the MLS bus network Mls Digital Detector For Use With Digital Dsi Regulating Ballast Specifications: • Advanced presence detection by passive infrared (PIR) technology • Can be programmed to automatically recall Entry & Exit scenes • Can be programmed to create upto 6 lighting scenes • Two way programming enables easy re-commissioning when building use changes • Remote control for temporary user-override on/off and light level adjustment • Detection pattern and range in metres under normal operating conditions • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes) • MLS Detectors may be programmed to be members of up to four group zones • Regulating photocell adjusts luminaire output to maintain constant light levels • Communicates via the MLS bus network Mls Digital Detector Integral With Luminaire For Digital Dsi Regulating Ballast Specifications: • Advanced presence detection by passive infrared (PIR) technology • Can be programmed to automatically recall Entry & Exit scenes • Can be programmed to create upto 6 lighting scenes • Two way programming enables easy re-commissioning when building use changes • Remote control for temporary user-override on/off and light level adjustment • Detection pattern and range in metres under normal operating conditions • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes) • MLS Detectors may be programmed to be members of up to four group zones • Regulating photocell adjusts luminaire output to maintain constant light levels • Communicates via the Wipro MLS bus network Mls Programmer An accessory or component of the Product Module Regulating Microwave Sensor With Photocell For Digital Dimming Specifications: • Regulating photocell adjusts luminaire output to maintain constant light levels • Two way programming enables easy re-comissioning when building use changes • Remote control for temporary user-override on / off and light level adjustment • Detection pattern and range in metres under normal operating conditions • Off delay in minutes following the last observed movement after which lights switch off (in steps of 5 minutes) • Advanced presence detection by microwave technology Universal Hand Held Controller An accessory or component of the Product Module