 |
|
| Distribution Boards, Pillar & Cabinets |
Introduction
STANDARD Power Distribution Boards, feeder Pillars, Service Cabinets and Flange Mounted Feeder Pillars are basically engineered to the customer requirements and designs. Industrial aesthetics, safety of operation and trouble-free performance are the basic criteria of operation and selection of materials. STANDARD boards and pillars are capable of withstanding short circuit upto a level of 60kA.
Features
Enclosures are made of CRCNHOT 01P Galvanised Sheet Steel as per BS-729 of Fibre Glass Reinforced Polyester (FRP) with IP rating 43 to 54 as per BS-5490.
. The Bus Bars made of hard drawn Tinned copper are fitted on insulated DMC Supports.
. Outgoing Terminals, Bus Bars are colour coded with heat shrinkable sleeves.
. 3-point locking with cylindrical master key and pad-locking arrangement.
. Vertical 3 Phase Fuse Switch Gang Operated or Single Pole Operated fuse way conform to DIN 43623/IEC-947-3.
Specification
Conform to IEC:439-1985 and BS:5486
Incomers
Hook operated Incomers are availablefrom 400 Amps. to 2500Amps.
Outgoing Vertical Fuse Switches & Fuse-Ways
100 Amps. 250 Amps. and 630 Amps. rating available in form 'A' & 'B'. Provision to incorporate extra feeders, ifrequired,canbe provided.
Painting
High quality synthetic stoving paints are applied electrostatically. Powder coatings of various shade in RAL7032. Cable Glands as per BS: 6121 complete with earth tags, PVC shrouds with suitable gasketed plates are provided. High degree of protection can be provided as per customer needs. |
|
 |
|
BAJAJ